Table of Contents
Advertisement
3.
Remove the battery (3).
To insert the battery, reverse the removal procedures.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3
Solid-state drive descriptions and part numbers
Description
1 TB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC
1 TB, M.2 2280, PCIe, NVMe, value solid-state drive
512 GB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC
512 GB, M.2 2280, PCIe, NVMe, value solid-state drive
256 GB, M.2 2280, PCIe-4×4, ZTurbo solid-state drive with TLC
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive
Solid-state drive top shield: The solid-state drive top shield is not available as a spare part component.
Solid-state drive bottom shield
Solid-State Drive Thermal Pad Kit
Before removing the solid-state drive, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1.
Remove the two Phillips M2.0 × 3.4 screws (1) that secure the solid-state drive top shield to the computer.
Preparation for disassembly on page
Bottom cover on page
34).
34).
Battery on page
36).
Spare part number
M16560-005
M85370-005
M17436-005
M85364-005
M52025-005
M85354-005
N09637-001
N09636-001
Solid-state drive
37
Advertisement
Table of Contents
