Display; Low Blue Light Mode (Select Products Only); Wake-On-Touch (Select Products Only) - HP 15-ew0 Series Maintenance And Service Manual

Table of Contents

Advertisement

Table 2-2
Left-side components and their descriptions (continued)
Component
(2)
(3)

Display

Use the illustration and table to identify the display components.

Low blue light mode (select products only)

Your computer display is shipped from the factory in low blue light mode for improved eye comfort and safety.
Also, blue light mode automatically adjusts blue light emissions when you are using the computer at night or for
reading.
WARNING!
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort Guide
also provides important electrical and mechanical safety information. The Safety & Comfort Guide is available on
the web at http://www.hp.com/ergo.

Wake-on-touch (select products only)

Use the wake-on-touch feature to bring the computer out of the Sleep state quickly.
Audio-out (headphone)/Audio-in (microphone)
combo jack
Memory card reader
Description
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support optional
standalone microphones.
WARNING!
To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset. For
additional safety information, see the Regulatory, Safety, and
Environmental Notices.
To access this guide:
Select the Search icon in the taskbar, type HP
Documentation in the search box, and then select HP
Documentation.
NOTE:
When a device is connected to the jack, the computer
speakers are disabled.
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1.
Hold the card label-side up, with connectors facing the
computer.
2.
Insert the card into the memory card reader, and then press
in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
card reader.
Display
7

Advertisement

Table of Contents
loading

Table of Contents