Table of Contents
Advertisement
The Power LED
press the Power button.
12.
Use the Router Link LED
extender-to-router connection is optimal.
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, an arrow LED blinks for
two minutes. If this happens, adjust the position of the extender. Use the following table to
understand the arrow LEDs.
Table 2. Arrow LEDs
Arrow LED State
No arrow LEDs are lit.
Router arrow blinks.
Client arrow blinks.
Extender WiFi Performance
The extender LEDs indicate the strength of the extender's WiFi connections. Use the
following table to understand the extender LEDs.
Table 3. WiFi Performance LEDs
LED
Router Link LED indicates the strength of the
WiFi signal between the router and the extender.
Client Link LED indicates the strength of the
WiFi signal between the extender and the computer
or WiFi device.
N300 WiFi Range Extender
lights green within one minute. If the Power LED does not light,
on the front panel to help you choose a spot where the
Action
No action is needed. The extender is in a good location.
Move the extender closer to the router.
Move the computer or WiFi device closer to the extender.
Description
The LEDs are color coded as follows:
•
Green indicates the best connection.
•
Amber indicates a good connection.
•
Red indicates a poor connection.
An LED that is off indicates no WiFi connection.
Install Your Extender
14
Advertisement
Table of Contents
