HP Compaq Presario,Presario EZ2200 Important Information page 4

Audio Setting for QuickCam
Express
(available on select models)
When launching QuickCam Express for the first time, you
will be prompted to complete the software setup. Follow
the on-screen instructions until you get to the QuickCam
Audio Tuning Wizard. At the Microphone Check screen, if
the volume bar does not respond, indicating that the
microphone is working, do the following:
1. Click the icon in the Recording Level area.
2. In the Recording Control window, select Microphone
as the recording device.
3. Click ∫ to close the Recording Control window and
return to the Microphone Check screen. The volume
bar should now respond to sound.
4. Click Next Next and follow the on-screen prompts to
Next Next
complete the setup.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR
OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.
This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any
Product names mentioned herein are trademarks and/or registered trademarks of their respective companies.
Printed in the U.S.A., Brazil, Canada, Japan, Korea, Singapore, Taiwan, and the U.K.
Microphone Microphone Microphone
The information in this guide is subject to change without notice.
form without prior written consent from Compaq Computer Corporation.
©2000 Compaq Computer Corporation. All rights reserved.
Compaq is registered with the U.S. Patent and Trademark Office.
NOTICE
.
First Edition, January 2000
162927-001