Adding Or Replacing The Hp Pocket Media Or Diskette Or Hard Disk Drive - HP Compaq Presario,Presario CQ5110F Supplementary Manual

Hp compaq presario,presario cq5110f: supplementary guide
Hide thumbs Also See for Compaq Presario,Presario CQ5110F:
Table of Contents

Advertisement

Adding or Replacing the HP Pocket Media or
Diskette or Hard Disk Drive
1
Complete the procedures to remove the HP Pocket Media, diskette (floppy), or hard
disk drive, if necessary. See "Removing the HP Pocket Media or Diskette or Hard Disk
Drive" on page 11.
2
Slide the HP Pocket Media, diskette (floppy), or hard disk drive into the front of the
chassis until it locks into place.
3
Align the two screw holes on the chassis with the two screw holes on the side of the
drive, and then attach the two screws. For the HP Pocket Media and diskette (floppy)
drive, make sure to insert the screw into the holes labeled (1). For a hard disk drive,
make sure to insert the screw into the holes labeled HDD.
Upgrading and Servicing Guide
13

Advertisement

Table of Contents
loading

Table of Contents