HP Compaq Presario,Presario 8380 Supplementary Manual page 48

9
Holding the new DIMM by its edges only, remove
it from its antistatic packaging. A DIMM has two
small notches on the lower edge that fit into
raised bumps in the DIMM socket.
10
Hold the DIMM perpendicular to the socket,
aligning the notches with the bumps.
44
Getting Help
11
Push straight down on top of the DIMM until it is
fully seated in the socket. The retaining clips on
the ends of the socket will automatically lock
into position when the DIMM is fully inserted.
12
Replace the right side panel (see "Replacing the
Right Side Panel" on page 56).
13
Replace the back panel (see "Replacing the Back
Panel" on page 57).
14
Reconnect the power cord.
15
Reconnect the modem cable.
16
Turn on your computer.