Disabling The Tv Option; Disconnecting The Tv - HP Compaq Presario,Presario 6370 Supplementary Manual

Disabling the TV Option

When you want to disconnect the TV from the
computer, you may need to disable the TV option to
return your computer display to its original resolution.
To disable the TV option:
1. Right-click an empty area of the screen.
2. Click Properties.
3. Click the Settings tab.
4. Click the Advanced button.
5. Click the nView tab, and then select the
Standard [nView disabled] option.
IMPORTANT: If you viewed the computer
image on just the TV, do the following: With
Standard [nView disabled] selected
under nView Modes, click the Device
Settings button, choose Select Output
Device, and then select the Analog
Display option.
4
6. Click the OK button, and then click OK again.
7. When the computer image appears on the
computer screen, click Yes to keep the setting. You
have 15 seconds to accept this new setting before
it reverts to the previous setting.

Disconnecting the TV

1. Disable the TV option. See the previous procedure.
2. Turn off the TV and the computer.
3. Remove the video cable at the TV and the PC.
4. Remove the audio cable at the TV and the PC.
5. Reconnect your computer speaker cable to the Line
Out jack (lime green connector) on the back of the
computer.
Connecting the Computer to a Television