HP Compaq Presario,Presario 6245 Supplementary Manual page 2

Press the down arrow key or up arrow key to select
■
the CD-ROM item. Press the – (minus) key to move the
CD-ROM item down until it is the third item in the list.
Or
Press the down arrow key to highlight the First Boot
■
Device selection. Press the + (plus) key until Floppy is
the selection.
18 Press the F10 key to save the changes and exit BIOS.
19 With Yes selected, press Enter. After the computer
restarts, a series of startup screens appear. To proceed
with the initial Microsoft Windows setup, you must
answer a few questions.
20 Complete the registration process, and then reconnect
all peripheral devices.
21 Reinstall software not originally installed on the
computer by the factory.
22 Copy data files you saved on the backup CD or
diskette you made to your hard disk.
Note: If you have questions about the system recovery
procedure, please contact Support; see your
support documentation included with the computer
documentation.