HP Compaq Presario,Presario 6001 Getting Started page 73

17. Change the first boot device using one of these
methods:
❏ Press the down arrow or up arrow key to
select the CD-ROM item. Press the – (minus)
key to move the CD-ROM item down until it
is the third item in the list.
❏ Press the down arrow key to highlight
the First Boot Device selection. Press the
+ (plus) key until Floppy is the selection.
18. Press the F10 key to save the changes, and
exit BIOS.
Getting Started
Using Application Recovery and System Recovery
19. With Yes selected, press Enter.
After the computer restarts, a series of startup
screens appear. To proceed with the initial
Microsoft Windows setup, you must answer
a few questions onscreen.
20. Complete the registration process, and then
reconnect all peripheral devices.
21. Reinstall any software you installed after you
purchased the computer.
22. Copy data files you saved on the backup CD
or diskette (floppy disk) to your hard disk.
6–13