HP Compaq Presario,Presario 6001 Getting Started page 71

4. Press the Power button on the front of the PC to
turn on the computer.
5. Enter the BIOS setup program during the
startup by doing the following:
When the black screen with the Compaq logo
appears, press the F1 key on the keyboard
until Entering SETUP displays. (You have only
a few seconds to press the F1 key before the
normal setup process continues.) Wait until the
BIOS setup program opens.
6. Press the right arrow key to select Boot.
7. Press the down arrow key to select Boot
Device Priority, and then press Enter.
Getting Started
Using Application Recovery and System Recovery
8. Change the first boot device to CD-ROM by
using one of these methods:
❏ Press the down arrow key to select the
CD-ROM item. Press the + (plus) key to
move the CD-ROM item up until it is the
first item in the list.
❏ Press the down arrow key to highlight
the First Boot Device selection. Press the
+ (plus) key until CD-ROM is the selection.
When installation is complete return the BIOS
to the original setting.
9. Press the Eject button on the top CD-ROM
drive, and wait for the tray to open. Insert
Recovery CD #1 and close the tray.
10. Press the F10 key to save the changes, and
exit BIOS.
6–11