Automatic Standby Or Hibernation Mode - HP Compaq Presario,Presario 6001 Getting Started

Using the Computer
Automatic Standby or
Hibernation Mode
To automatically put the computer into standby or
hibernation mode, modify the power management
settings.
To Modify the
Power Management Settings
1. Click Start on the taskbar.
2. Click Control Panel.
3. Click Performance and Maintenance.
4. Click Power Options.
5. Click the Hibernate tab to see if the
auto-hibernation feature is enabled. A
check mark should appear in the Enable
hibernation check box. If necessary, click
the check box so that a check appears in it
and then click Apply.
3–34
6. Click the Power Schemes tab to set the
timers for standby and/or hibernation. In the
Power Schemes box, select a power scheme
from the drop-down list. Choose the timers:
❏ To turn on auto-standby for computer,
click a time (such as After 20 mins) in
the System standby list.
❏ To set the timer for auto-hibernation,
click the time to elapse before hibernation
(such as After 1 hour) in the System
hibernates list.
If both standby and hibernation timers
are set, the system hibernation timer
must be set for a longer time than the
system standby timer.
7. Click OK.
Getting Started