Page 1
Computer Setup (F10) Utility Guide HP Compaq Business Desktop dx2000 Microtower Document Part Number: 359500-001 February 2004 This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes.
Page 2
Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ■ ■ ■ ■ ■ ■ ■ Using Computer Setup (F10) Utilities Computer Setup can be accessed only by turning the computer on or restarting the system.
Page 6
Computer Setup (F10) Utility 3. A choice of ten headings appears in the Computer Setup Utilities 4. Use the arrow (left and right) keys to select the appropriate 5. To apply and save changes, select Save Settings and Exit. Ä CAUTION: Do NOT turn the computer power OFF while the ROM is saving your F10 Computer Setup changes because the CMOS could become corrupted.
Computer Setup Heading Option System Information None CPU/Memory Information DMI Information ✎ Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Utility Guide Computer Setup (F10) Utility Description Lists: • Product Name • Chipset Type •...
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Standard CMOS Setup System Time (hh/mm/ss) System Date (mm/dd/yyyy) Floppy Drive A Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Advanced CMOS Setup Boot Device Priority Try Other Boot Devices ✎...
Page 9
Computer Setup (Continued) Heading Option Advanced CMOS Setup Post Delay Time (in (Continued) seconds) System Keyboard APIC ACPI SCI IRQ Hyper-Threading Technology ✎ Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Utility Guide Computer Setup (F10) Utility Description Sets the amount of time before the Setup...
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Advanced CMOS Setup Internal Graphic Mode (Continued) Select Boot Device Priority Power Management ACPI Standby State Setup Restore on AC/Power Loss Resume On Ring ✎ Support for Computer Setup options may vary depending on your specific hardware configuration.
Computer Setup (Continued) Heading Option Power Management Resume On PME Setup (Continued) Peripheral Setup OnBoard LAN OnBoard LAN Chip Boot Init. Graphics Adapter Priority USB Controller ✎ Support for Computer Setup options may vary depending on your specific hardware configuration. Computer Setup Utility Guide Computer Setup (F10) Utility Description...
Page 12
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Peripheral Setup USB 1.1 Device Legacy (Continued) Support OnBoard Serial Port OnBoard Parallel Port Parallel Port Mode ✎ Support for Computer Setup options may vary depending on your specific hardware configuration. Description Sets the USB 1.1 Device Legacy Support under DOS Mode.
Computer Setup (Continued) Heading Option Hardware Monitor CPU Ratio Selection CPU Warning Temperature CPU Shutdown Temperature System Warning Temperature System Shutdown Temperature CPU Temperature System Temperature CPU FAN Speed Chassis FAN Speed CPU VID Vccp +1.5V +2.5V +3.3V +5.0V +12.0V ✎...
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Hardware Monitor HVcc (+3.3VSB) (Continued) Password Option Change Supervisor Password Password Status Password Check Load Default Settings None Save Settings and Exit None Exit Without Savings None ✎ Support for Computer Setup options may vary depending on your specific hardware configuration.