Tls Security Tab - Ricoh M C251FW User Manual

8. Configuring the Machine Using Utilities
HTTPS/HTTP
Item
Force To Use HTTPS
mDNS Setting
Item
mDNS
Printer Name

TLS Security Tab

TLS Security Level Settings
Item
TLS Level
TLS1.3
TLS1.2
TLS1.1
298
Specify whether or not to make the use of HTTPS mandatory. If this is
enabled, the connection to HTTP Port 80 is automatically redirected to Port
443. Furthermore, if the user accesses the web page by entering the URL
"http://...", the access is redirected to "https://...".
Note that Port 80 cannot be used for IPP printing.
Select to enable Multicast DNS (via UDP port 5353). If disabled, the item
below cannot be configured.
Enter the name of the machine. Can contain up to 32 characters.
Select the TLS security level from [High], [Medium] or [Low].
Specify whether or not to enable TLS 1.3.
If [TLS Level] is set to [High], this setting is automatically enabled and
cannot be disabled.
If [TLS Level] is set to [Medium] or [Low], this setting can be enabled/
disabled manually.
Specify whether or not to enable TLS 1.2.
If [TLS Level] is set to [High], this setting is automatically disabled and
cannot be enabled.
If [TLS Level] is set to [Medium] or [Low], this setting can be enabled/
disabled manually.
Specify whether or not to enable TLS 1.1.
If [TLS Level] is set to [High] or [Medium], this setting is automatically
disabled and cannot be enabled.
If [TLS Level] is set to [Low], this setting can be enabled/disabled manually.
Description
Description
Description