Table of Contents
Advertisement
• The machine will notify you if the destination you want to delete is set as a forwarding destination of
received faxes. If you delete the destination anyway, reconfigure the fax forwarding setting. For
details about fax forwarding settings, see page 282 "Fax Tab".
Testing Transmission
• When a USB flash memory device is inserted into the machine, scanned documents will be stored
in the USB flash memory device. Confirm that there are no USB flash memory devices inserted into
the machine.
1.
Place the original on the exposure glass or in the ADF.
2.
Press the [Home] key.
3.
Press the [Scanner] icon on the Home screen.
4.
Press [Address Book].
5.
Select the desired destination, and then press [OK].
Press the check box for the desired destination, and then make sure that the box is checked.
When you specify a scan destination, the machine's scan settings change automatically according
to the information registered for that destination in the Address Book. If necessary, you can change
the scan settings using the control panel. For scan settings, see page 164 "Specifying Scan
Settings for Scanning".
ECC202
Registering Scan Destinations
143
Advertisement
Table of Contents
Troubleshooting
