Cycle Operation - Huebsch Alliance Laundry Systems TR7104WN User Manual

Cycle Operation

The cycles of your washer include several different stages. Re-
fer to the tables below for what can be expected during the cy-
cles that you select.
The cycle stages are dependent on the cycle, selections and
options chosen.
The times listed are the default times. They are approximate
and will vary depending on the selections and options chosen.
Cycle Stage
Soak Fill/Agitate/Soak
Pre-Wash Fill/Agitate/Spin
Wash (through Seri- Fill/Agitate
al Nos. beginning
1810)
Wash (starting Seri- Fill/Agitate
al Nos. beginning
1810)
Extra Rinse Spin/Fill/Agitate/
Spin
Final Spin Spin-Spray
Total (without Op-
tions, through Seri-
al Nos. beginning
1810)
Total (without Op-
tions, starting Seri-
al Nos. beginning
1810)
Cycle Stage
Soak Fill/Agitate/Soak
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Default Time
(minutes)
Activity
23:00
15:00
14:00
34:00
18:00
14:30
28:30
48:30
Heavy Duty, Perm Press, Delicates, Handwash, Bulky Cycles
Default Time
(minutes)
Activity
23:00
Cycle stages that are Options must be selected on the keypad
to be included in the cycle.
NOTE: The Pre-Wash cycle stage will not fill if the Soak
Option is also selected. The Soak fill will not drain out
the water at the end in this case.
Normal Eco Cycle
Agitation Level
High
High
High
High
High
Agitation Level
Heavy Duty, Bulky =
High
All Others = Medium
17
Spin Speed Comments
Option
Low Option
Medium
Medium
Medium Option
High
Spin
Speed
Option
Table continues...
Part No. 204949EN
Cycle Operation
Comments