Manual Soaking - Huebsch Alliance Laundry Systems TR7104WN User Manual

Control Panel
the remaining time. The Start/Pause button must be pressed
to restart the cycle. If the lid has been reclosed and the Start/
Pause button has not been pressed after 10 seconds, a chime
will sound as a reminder that the cycle has not been restarted.
To pause a running cycle, press the Start/Pause button once.
The lid will unlock after about 10 seconds if the cycle is in agi-
tate or up to 60 seconds if the cycle is in spin. The display will
alternate between St and the remaining cycle time.
After closing the lid, press the Start/Pause button once more
to re-start the cycle. The cycle will resume after a 10-second
delay. The washer's controls are reactivating.
The Auto Fill sensing stage will begin again after the cycle has
been paused. If you pause the cycle to add an item, once the
cycle resumes it will sense if more water needs to be added or
not.

Manual Soaking

Do not fill the washer and open the lid or press the Start/
Pause button to perform a soak cycle. Use the Soak option on
the control panel to perform this operation.
Failure to use the Soak cycle when soaking laundry
will result in the washer overflowing and cause prop-
erty damage.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
CAUTION
W958
16 Part No. 204949EN