Selections - Huebsch Alliance Laundry Systems TR7104WN User Manual

Special
Cycle
Display Name
Wool
P6
Athletic
P7
Denim
P8
Waterproof Items
If waterproof or water-resistant items need to be washed, use
only the Special Cycle - Waterproof (P3).
Examples of waterproof items include rain coats and bed lin-
ers. Load the items evenly and load washtub no more than
1/2 full. For best washing results, add another item such as a
cotton sheet on top of the waterproof items to make sure they
get fully submersed in the water and that no air is trapped un-
der the waterproof items.
Failure to closely follow these instructions may re-
sult in an abnormal vibrating and out-of-balance con-
dition that could result in physical injury, property
damage and/or appliance damage.
Customized Wash Time
Use the up and down arrow keypads to adjust the length of
wash time. The time can be increased or decreased by one mi-
nute within the Light and Max soil level settings. Set the wash
time depending on the type of laundry being washed.

Selections

The following selections can be used to modify the currently
chosen cycle. The default selections will be lit after choosing a
cycle.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
Special Cycle Description
Wash wool items using this cy-
cle. It includes cold water, a 30-
minute soak, a very short gen-
tle agitation, a one-minute
spin, a cold rinse, and an ex-
tended spin time.
This cycle includes a cold wash
and a shorter, gentle agitation.
This cycle is similar to the
Heavy Duty cycle but with a
cold wash and longer spin
time.
Table 3
WARNING
Temp
Press the Temp keypad to change the cycle's wash and rinse
water temperature. The top temperatures are for the wash wa-
ter. The bottom ones are for the rinse water. For example, se-
lecting Warm/Cold will provide warm wash water and cold
rinse water.
Load Size
The Load Size Selection determines the amount of water used
in the cycle.
Choose Small, Medium, Large or Auto Fill according to the
amount of laundry being washed.
Auto Fill is the default Load Size for all cycles, but other fill lev-
els can be manually selected.
Auto Fill will provide the most efficient use of water and also
enhance wash performance by optimizing the water level for
each particular load size and type.
NOTE: Auto Fill works in multiple stages. During the
first fill step of the cycle, water will fill to the minimum
level programmed for the specific cycle selected. Once
the wash step begins, the control starts sensing the
load. Once sensing is complete more water may be
added to optimize wash results. This process may take
several fills to optimize the water level. It is part of the
machine's normal operation.
Soil Level
Changing the Soil Level keypad will add or subtract wash time
in the selected cycle.
Choose Light, Medium, Heavy or Max according to the amount
of soil in the laundry load. Light is the minimum and Max is
the maximum amount of time.
The Soil Level LED will flash to indicate that you can also ad-
just the Wash Time using the up and down arrow keypads. The
time is increased or decreased by one minute.
W957
The Soil Level keypad is also used to select the final spin
speed when the Rinse & Spin or Spin cycles are selected. Re-
fer to Table 2 .
13
Control Panel
Part No. 204949EN