Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Huebsch Alliance Laundry Systems TR7104WN
Summary of Contents for Huebsch Alliance Laundry Systems TR7104WN
- Page 1 User's Guide for Topload Washers Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) Part No. 204949EN August 2019...
- Page 3 WARNING Failure to install, maintain, and/or operate this ma- chine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 WARNING For your safety and to reduce the risk of fire or an explosion, do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
-
Page 4: Table Of Contents
Table of Contents Safety Information...................5 Explanation of Safety Messages..............5 Important Safety Instructions................. 5 Operation....................7 Before Washing..................... 7 Loading the Washer..................7 Control Panel..................11 Digital Display....................11 Cycles......................11 Selections....................13 Options....................... 13 Status......................14 To Wash Clothes..................14 Manual Soaking..................16 Cycle Operation.................. -
Page 5: Safety Information
Safety Information Safety Information Explanation of Safety Messages Important Safety Instructions Precautionary statements (“DANGER,” “WARNING,” and “CAU- Save These Instructions TION”), followed by specific instructions, are found in this man- ual and on machine decals. These precautions are intended WARNING for the personal safety of the operator, user, servicer, and those maintaining the machine. - Page 6 Safety Information • Children less than three years should be kept away unless Always contact your dealer, distributor, service agent or the continuously supervised. manufacturer about any problems or conditions you do not un- derstand. • Do not reach into the washer if the washtub or agitator, if applicable, is moving.
-
Page 7: Operation
Operation Operation Before Washing Pretreat Pretreat shirt collars and cuffs with a pretreat product or liquid Prepare Wash Load detergent when placing them in the washer. Before washing, Empty Pockets and Cuffs treat special stains individually. Make sure all pockets are empty and turn them inside out. WARNING One bobby pin, metal or plastic toy, nail or sharp object in a load can catch laundry, cause tears and plug the pump. - Page 8 Operation WRONG Water Level for Size of Load W282I_SVG • Items should move freely through the wash water for best CORRECT Water Level for Size of Load cleaning results. • When washing very large items, do not fill washtub as full as with other loads.
- Page 9 Operation Wash Temperature Manual Load Sizes Large 8-9 shirts, 5 pair polyester Hot water is the most effective for cleaning, but it is not recom- pants or 2 queen size sheets, mended for all fabric types (read labels). 4 pillow cases, 2 nightgowns, 1 pair men’s pajamas or 1 Warm queen size bedspread...
- Page 10 Operation Wash Temperature Guide Water Temperature Comments • Sturdy whites • Best cleaning and colorfast for items soiled items with oily or greasy stains, • Work clothes grass, or ink. • Soiled items • Diapers WARM • Light and mod- •...
-
Page 11: Control Panel
Control Panel Control Panel Digital Display Cycles The two-digit display is used to show the time remaining in a The following cycle descriptions will help determine which cy- cycle. cle to choose depending on the type of laundry being washed. The descriptions are standard settings that may be modified If the cycle time is over 99 minutes the control will display 1H, using the Selections and Options. - Page 12 Control Panel Handwash Special Cycles Wash items with handwash on the garment tag in this cycle. Select the Special Cycles keypad. Press the up and down ar- This cycle is designed to gently move items through the water row keypads for the desired cycle. The display will show P and so it fills to a higher water level.
-
Page 13: Selections
Control Panel Temp Special Cycle Press the Temp keypad to change the cycle's wash and rinse Display Name Special Cycle Description water temperature. The top temperatures are for the wash wa- ter. The bottom ones are for the rinse water. For example, se- Wool Wash wool items using this cy- lecting Warm/Cold will provide warm wash water and cold... -
Page 14: Options
Control Panel Options Signal Pressing the Signal keypad will change the end of cycle signal The following options can be used to modify the currently volume. There are four settings: Off, Low, Medium, High. chosen cycle, signal volume and control lock. Control Lock (Secure keypad) Soak Pressing and holding the Signal keypad for three seconds will... -
Page 15: To Wash Clothes
Control Panel To Wash Clothes IMPORTANT: Before using your new washer, make sure the washer cord is connected to an appropriate electrical outlet that is properly installed and connec- ted to a protective earth/ground. Make sure the washer hoses are connected to the hot and cold water faucets, and that the faucets are turned on. -
Page 16: Manual Soaking
Control Panel the remaining time. The Start/Pause button must be pressed to restart the cycle. If the lid has been reclosed and the Start/ Pause button has not been pressed after 10 seconds, a chime will sound as a reminder that the cycle has not been restarted. To pause a running cycle, press the Start/Pause button once. -
Page 17: Cycle Operation
Cycle Operation Cycle Operation The cycles of your washer include several different stages. Re- Cycle stages that are Options must be selected on the keypad fer to the tables below for what can be expected during the cy- to be included in the cycle. cles that you select. - Page 18 Cycle Operation Heavy Duty, Perm Press, Delicates, Handwash, Bulky Cycles Default Time Spin (minutes) Cycle Stage Activity Agitation Level Speed Comments Pre-Wash Fill/Agitate/Spin 15:00 Heavy Duty, Bulky = Option High All Others = Medium Wash Fill/Agitate/Spin Heavy Duty, through Heavy Duty, Bulky = Heavy Duty Serial Nos.
- Page 19 Cycle Operation Heavy Duty, Perm Press, Delicates, Handwash, Bulky Cycles Default Time Spin (minutes) Cycle Stage Activity Agitation Level Speed Comments Total (without Op- Heavy Duty, through tions) Serial Nos. begin- ning 1810 = 40:00 Heavy Duty, starting Serial Nos. begin- ning 1810 = 45:00 Perm Press, Bulky = 36:00...
- Page 20 Cycle Operation Special Cycles Eco Heavy Duty (P1), Eco Delicate (P2), Waterproof (P3) Default Time (minutes) Cycle Stage Activity Agitate Level Spin Speed Comments Soak Fill/Agitate/Soak 23:00 Eco Heavy Duty = Option High Eco Delicate = Medi- Waterproof = Low Pre-Wash Fill/Agitate/Spin 15:00...
- Page 21 Cycle Operation Special Cycles Eco Heavy Duty (P1), Eco Delicate (P2), Waterproof (P3) Default Time (minutes) Cycle Stage Activity Agitate Level Spin Speed Comments Total (without Options) Eco Heavy Duty = 32:30 Eco Delicate = 27:30 Waterproof = 28:30 Special Cycles Super Soiled (P4), Whites (P5), Wool (P6), Athletic (P7), Denim (P8) Default Time (minutes)
- Page 22 Cycle Operation Special Cycles Super Soiled (P4), Whites (P5), Wool (P6), Athletic (P7), Denim (P8) Default Time (minutes) Cycle Stage Activity Agitate Level Spin Speed Comments Extra Rinse Fill/Agitate/Spin Wool = 8:00 Wool, Athletic = Wool = Low Option (on by de- fault for Super All Others = 12:30 All Others = Medi-...
-
Page 23: Common Washer Sounds
Cycle Operation Common Washer Sounds The large fabric softener dispenser allows for the fabric soften- er to be diluted with water. We recommend adding water up to the fill level. Do not exceed tip of arrow which indicates correct Sounds Cause fill level. - Page 24 Cycle Operation Use Tips • Fabric softener spilled onto garments may cause staining. To remove, dampen stain and rub with bar soap. Wash as usual. • Liquid fabric softeners will be dispensed during the first rinse and should not be combined with bleach, bluing, starch, detergents, soaps or packaged water conditioners.
-
Page 25: Clothing Care
Clothing Care Clothing Care Clothing Concerns To keep clothes looking white or bright, use good washing clothes are not as bright as they should be, take corrective practices at all times to prevent a gradual build-up of soil or measures immediately. water hardness minerals on them. - Page 26 Clothing Care Problem Cause Solution Clothes Tearing or Damaged Improper Use of Chlorine Bleach No correction for bleach damaged clothes. Always measure and dilute bleach. Take extra care to avoid unwanted spill- ing. Insufficient Precare Fasten all hooks and zippers. Mend tears.
-
Page 27: Maintenance
Maintenance Maintenance Cold Weather Care All hoses should be checked on a monthly basis for any visible signs of deterioration. Any hose showing the signs of deteriora- tion listed above should be replaced immediately. All hoses If the unit is delivered on a cold day (below freezing), or is stor- should be replaced every five years. -
Page 28: Preventative Maintenance
Maintenance Preventative Maintenance Follow these guidelines to ensure the washer operates proper- ly. Call for service if you observe any of the following: water of any amount on the floor, an increase in operating noise or wa- ter remaining in the wash basket after a cycle. Maintenance Proce- Frequency dure... -
Page 29: Troubleshooting
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Washer Symptom Possible Cause/Solution Won't Fill • Make sure power cord is plugged all the way into the electrical outlet. • Make sure hot and cold water faucets are turned on. •... - Page 30 Troubleshooting Washer Symptom Possible Cause/Solution Stops/Pauses During Cycle • Pauses are part of the washer’s normal operation. The washer will stop (pause) shortly before the wash and rinse spins. • Check the laundry room fuse or circuit breaker. Won't Drain •...
- Page 31 Troubleshooting Washer Symptom Possible Cause/Solution • This code will appear if the washer has not reached the fill level after 30 minutes Er, FL on digital display during a wash or rinse fill. • Make sure hot and cold water faucets are turned on. •...
- Page 32 Troubleshooting Washer Symptom Possible Cause/Solution Left Decimal Point blinking on display • This code indicates that the washer did not reach the maximum intended speed in one second on/one second off the final spin. • This could be due to an unbalanced load, excessive suds in the load, or too much water left in the tub due to slow draining.
-
Page 33: Contact Information
Troubleshooting Contact Information WARNING If service is required, contact the nearest Factory Authorized To reduce the risk of serious injury or death, DO NOT Service Center. repair or replace any part of the unit or attempt any If you are unable to locate an authorized service center or are servicing unless specifically recommended in the unsatisfied with the service performed on your unit, contact: user-maintenance instructions or in published user-...