Advertisement
Quick Links
LZS8WS EZH2O B
IMPORTANT! INSTALLER PLEASE NOTE.
THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER LINES
IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY FROM THE
BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREATING AN ELEC-
TROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT OF THE WATER.
THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY DRAIN FITTINGS
PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISOLATE THE FOUNTAIN
FROM THE BUILDING PLUMBING SYSTEM. WE SUGGEST THAT THE BOTTLE FILLING STATION AND WATER
COOLER BE PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI).
INSTALLER
LZS8WS Bottle Fillers are among the easiest to install on the market today. To
insure you install these models easily and correctly, PLEASE READ THESE
SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION. CHECK
YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING, ELECTRICAL, AND
OTHER APPLICABLE CODES. After installation, leave these instructions with the
Fountain for future reference.
LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A
LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A
T M
OTTLE
INSTALLATION, CARE & USE MANUAL
F
S
ILLING
TATION
IMPORTANT
THIS IS AN INDOOR APPLICATION ONLY.
ALL SERVICE TO BE PERFORMED BY AN
AUTHORIZED SERVICE PERSON.
TOOLS REQUIRED
BUT NOT PROVIDED:
SAFETY GLASSES
GLOVES
ELECTRIC DRILL
3/4" WRENCH OR CRECENT WRENCH
5/16" NUT DRIVER
UTILITY KNIFE
TAPE MEASURE
PENCIL
CENTER PUNCH
1/2" SOCKET & RATCHET WRENCH
5/32" ALLEN WRENCH
Page 1
& C
OOLER
98550C (Rev. B - 8/10)
Advertisement
Related Manuals for Elkay EZH2O LZS8WS 1A Series
Summary of Contents for Elkay EZH2O LZS8WS 1A Series
- Page 1 LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A INSTALLATION, CARE & USE MANUAL LZS8WS EZH2O B & C OTTLE ILLING TATION OOLER IMPORTANT THIS IS AN INDOOR APPLICATION ONLY. ALL SERVICE TO BE PERFORMED BY AN AUTHORIZED SERVICE PERSON. TOOLS REQUIRED BUT NOT PROVIDED: SAFETY GLASSES GLOVES...
- Page 2 LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A 17 7/8 454mm 3 9/16 90mm 178mm 178mm 7/16 11mm MOUNTING HOLES 18 13/16 478mm 381mm Single Rough-In Fig. 1 17 7/8 454mm 3 9/16 90mm 178mm 178mm 7/16 11mm MOUNTING HOLES 18 13/16 478mm 381mm...
- Page 3 LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A MOUNTING 7/16” BOLT HOLES FOR SCREWS TOP COVER FASTENING UNIT TO WALL UNIT CENTER LINE Fig. 4 Fig. 3 BOTTLE FILLER INSTALLATION Remove two (2) mounting screws with 5/32” allen wrench holding top cover to Bottle Filler (See FIG. 4). Remove top cover. Note do not discard mounting screws, they will be needed to reinstall top cover..
- Page 4 LZS8WS*1A, LZSDWS*1A, LZSTL8WS*1A, LZSTLDWS*1A LZS8WS*2A, LZS8WS*3A, LZSTL8WS*2A, LZSTL8WS*3A CHANGING THE FILTER AND RESETTING THE VISUAL FILTER MONITOR The electronic sensor includes LED filter status indicators that are factory preset to monitor filter life. The sensor monitors the “ON” time of the water valve solenoid and keeps track of total time water is dispensed. There are (3) LED’s that indicate the following: Green: LED (Good) indicates that the filter is operating within 0% - 80% of its life.
-
Page 5: Replacement Part Kits
IMPRESO EN LOS E.E.U.U. POUR OBTENIR DES PIÈCES, CONTACTEZ VOTRE DISTRIBUTEUR LOCAL OU COMPOSEZ LE 1.800.323.0620 IMPRIMÉ AUX É.-U. ELKAY MANUFACTURING COMPANY • 2222 CAMDEN COURT • OAK BROOK, IL 60523 • 630.574.8484 Page 5 98550C (Rev. B - 8/10)