Download Print this page

Advertisement

Quick Links

欢迎使用本公司蓝牙系列产品,为了使您熟练的掌握使用方法,使用前请您仔细阅读本
操作指南,请勿自行拆卸本产品,请使用标配的充电线充电器充电头等,以免损坏本机器设
备和发生意外。
Welcome to the use bluetooth headsets made by our company. Please
kindly read the manual carefully in order to make you skilled to use it.
Please do not disassemble it. Please use the standard charger and
charge cable in order not to damage the Bluetooth headset
.
一,
开机:用手指轻按主功能键 3 秒(有开机提示音),此时本机器指示灯(红/蓝灯交
替闪烁)进入蓝牙配对状态,然后打开手机,点开蓝牙进行索,直至手机蓝牙显示
设备名:S530,然后点击至连接成功。
One
Start:
is voice prompt), at the same time, the indicator light (red/blue lights
flashing in the state of the bluetooth pairing),
mode and search S530, then connect with S530 it until you connect it successfully.
二, 音乐播放:打开手机音乐播放器进行音乐播放,此时轻按主键(音乐暂停),再按主
键(继续播放)。当手机有电话打进时,音乐自动停止。
Two
Music player : tap the call button to stop the music or continue to play music.
Tap the call button to continue play music. Music will stop when there is a call.
接打电话:当所连接手机有电话打进时,本机器和手机会有同步钤声响起,此时轻按
主按键,电话接通。通话完毕,再轻按主按键,电话挂断。
Three
Receive or make a call. When there is a call, the Bluetooth headset will ring, Tap
the call button to receive, hang up or reject a call.
尾号重拔;双击主按键,本机器会自动重拔手机最后一个拔出去过的电话号码。
S530 操作指南
Bluetooth Headset S530 Manual
Start the headset by long pressing the call button 3 seconds.
Put the mobile phone in pairing
(there

Advertisement

loading

Summary of Contents for TP-Link S530

  • Page 1 (red/blue lights flashing in the state of the bluetooth pairing), Put the mobile phone in pairing mode and search S530, then connect with S530 it until you connect it successfully. 二, 音乐播放:打开手机音乐播放器进行音乐播放,此时轻按主键(音乐暂停),再按主 键(继续播放)。当手机有电话打进时,音乐自动停止。...
  • Page 2 Four Automatically call the last phone number: the bluetooth headset will automatically call the last phone number. 五 语言切换;本机器具有中文/英文转换功能,轻按主按键 1 秒开机(不要进入配对状 态),此时本机器语音提示:开机 ,蓝色指示灯点亮。再轻按主按键 1 秒放手,语音自动 切换成功(会伴有语音提示:中文模式/或者英文模式) Five Languages change Function ; This machine has English/Chinese change function, pressing the call button at the moment there is voice prompt that the 1 second (not pairing mode) headset is started and the blue light is on.
  • Page 3 十 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.