Using The Auto-Adjustment Function - HP Compaq Presario,Presario CQ1569 User Manual

Table 4-2 OSD Menu (continued)
Icon Main Menu
Information
Factory Reset

Using the Auto-Adjustment Function

You can optimize the screen performance for the VGA (analog) input by using the Auto/OK button on
the monitor.
This procedure can correct the following image quality conditions:
● Fuzzy or unclear focus
● Ghosting, streaking or shadowing effects
●
Faint vertical bars
●
Thin, horizontal scrolling lines
●
An off-center picture
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the Auto/OK button on the monitor front panel. You can also press the Menu button to open
the OSD window, then select the Image Control, followed by Auto-Adjustment.
ENWW
Submenu Description
Sleep Timer Provides the timer adjustment menu options:
●
●
●
●
●
Selects and displays important information about the monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution mode and refresh rate for
the monitor.
Serial Number Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support For service support, go to http://www.hp.com/support.
Returns settings to factory defaults.
Set Current Time—sets the current time in hours and
minutes
Set Sleep Time—sets the time you want to place the
monitor in sleep mode
Set on Time—sets the time you want the monitor to wake
up from sleep mode
Timer—sets the Sleep Timer feature On or Off. The default
setting is Off
Sleep Now—immediately sets the monitor to enter sleep
mode
Adjusting the Monitor Settings 15