Power Button Board - HP Pavilion DV6-1030 Maintenance And Service Manual

Power button board

Description
Power button board for computers with discrete graphics subsystem memory (includes cable)
Power button board for computers with UMA graphics subsystem memory (includes cable)
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover and keyboard (see
Remove the power button board:
1. Turn the switch cover upside down with the front toward you.
2. Remove the Phillips PM2.5×4.0 screw (1) that secures the power button board to the switch cover.
3. Remove the power button board (2) and cable.
Reverse this procedure to install the power button board.
80 Chapter 4 Removal and replacement procedures
Battery on page 59).
Switch cover and keyboard on page
Spare part number
512835–001
512834-001
76).