3.
Lift the edge of the TV tuner module (3), and pull the module away from the slot at an angle.
NOTE:
TV tuner module slot.
Reverse this procedure to install the TV tuner module.
RTC battery
Description
RTC battery
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory module compartment cover (see
Remove the RTC battery:
The TV tuner module is designed with a notch (4) to prevent incorrect insertion into the
Battery on page
59).
Memory module on page
Component replacement procedures
Spare part number
449729-001
64).
67