Step 2: Connect Ac Power - HP OmniBook VT6200 Startup Manual

CAUTION

Step 2: Connect AC power

Use only the HP AC adapter included with your computer (or other approved 75-
watt, 3.95-amp adapter). Do not use a 60-watt, 3.16-amp adapter, such as HP
F1454A or F1781A. Using any other AC adapter could damage the computer or
adapter and may void your warranty (see "Hewlett-Packard Limited Warranty
Statement" on page 59).
• Plug in the AC adapter, and connect it to the AC adapter jack on the back of the
computer. The computer's battery then starts charging.
While the battery is charging, you can continue with step 3.
Getting Started with Your HP Notebook
Setting Up Your Computer
Startup Guide 19