, y r You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover.
Page 3
Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended.
Page 4
Battery Precautions Read all instructions and warnings on the Battery before charging the battery. To avoid accidents, charge the supplied Battery only. Use only the supplied charging adapters for charging the internal Battery. Replace a dead Battery with only the same type (See Specifications, page Do not expose the Battery to rain or wet conditions.
Caution: Set the Spotlight On/Off Switch to the Off position before charging. Never charge the Battery for over 16 hours. Charge only until the red LED Battery Status Indicator shuts off. Do not operate the Spotlight while charging. Open the Charging Port Cover (10) and plug the AC/DC Adapter (37) into the charging port underneath, and the other end into the 120 VAC electrical outlet.
Store in a clean and dry location. Charge the Battery after each use, and every three months if not used. If the 12 VDC cord does not function, the fuse may be blown. Unscrew the metal nut at one end of the cord and remove the old fuse. If the wire inside is broken, replace with another F10A250V (Fast-acting, 10 Amp, 250 Volt) fuse of the same type.
Reassembly is the reverse of the earlier steps. When reattaching the wires, be certain that the wires are reattached in the order shown to the right. NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 93255 For technical questions, please call 1-800-444-3353 Parts List...
Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.