Reverse this procedure to install the power connector cable and DC bracket.
RJ-45 cover
Description
RJ-45 cover
Before removing the RJ45 cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
b.
Service access cover (see
c.
Hard drive (see
d.
Keyboard (see
e.
Top cover (see
f.
Display assembly (see
g.
System board (see
Battery on page
33).
Service access cover on page
Hard drive on page
Keyboard on page
48).
Top cover on page
51).
Display assembly on page
System board on page
36).
39).
57).
63).
Component replacement procedures
Spare part number
626580-001
67