Table of Contents
Advertisement
TouchPad
Description
For use only with a black top cover
Before removing the TouchPad, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
Remove the TouchPad:
1.
Turn the top cover upside down, with the front toward you.
2.
Release the TouchPad cable (1) from the top cover. (The TouchPad cable is attached to the top
cover with double-sided adhesive).
3.
Remove the two Phillips PM2.0×4.0 screws (2) that secure the TouchPad bracket to the top cover.
4.
Remove the TouchPad bracket (3).
5.
Release the TouchPad (4) by lifting the front edge until it rests at an angle.
56
Chapter 4 Removal and replacement procedures
Battery on page
Service cover (see
Service cover on page
Keyboard (see
Keyboard on page
Top cover (see
Top cover on page
Speakers (see
Speakers on page
34).
36).
48).
51).
54).
Spare part number
607766-001
Advertisement
Table of Contents
