Top Cover - HP Mini 110-1020 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad)
Before removing the top cover, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. If your device has WWAN capability, remove the SIM (see
6. Remove the memory module (see
7. Remove the keyboard (see
8. Remove the hard drive or solid-state drive assembly (see
Remove the top cover.
1. Turn the device upside down, with the front toward you.
2. Use a thin, flat tool to release the 4 tethered rubber feet.
3. Remove the four Phillips PM2.5×7.0 screws (1), and the Phillips SP2.0×5.0 screw (2) that secure
the top cover to the base enclosure.
4. Turn the device right-side up, with the front toward you.
5. Open the device as far as possible.
48 Chapter 4 Removal and replacement procedures
Battery on page 36).
Memory module on page 38
Keyboard on page 40).
Spare part number
537622-001
SIM on page 37.
Mass storage devices on page 45).