Display Assembly - HP Mini 1000 Maintenance And Service Manual

Display assembly

NOTE: Each display assembly spare part kit includes 1 webcam, 1 microphone, 1 speaker box, and
2 WLAN antenna transceivers/cables.
NOTE: 10.1-inch display assembly components are not sold separately. The complete display
assembly is available as spare part number 509696-001 for the red-colored model or 507312-001 for
all other models.
NOTE: 10.2-inch display assembly components are not sold separately. The complete display
assembly is available as spare part number 512140-001 for the red-colored model, or 507310-001 for
all other models.
Description
8.9-inch, WSVGA, BrightView
10.1-inch standard-definition AntiGlare
10.1-inch standard-definition AntiGlare (red-colored models)
10.2-inch WSVGA AntiGlare
10.2-inch WSVGA AntiGlare (red-colored models)
10.2-inch WSVGA AntiGlare (Compaq Mini 700)
See Display assembly components on page 16
Before removing the display assembly, follow these steps:
1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the device.
3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4. Remove the battery (see
5. Remove the following components:
a. Keyboard (see
b. Hard drive or solid-state drive (see
c. Top cover (see
Remove the display assembly:
58 Chapter 4 Removal and replacement procedures
for more spare part information.
Battery on page 32).
Keyboard on page 35)
Mass storage devices on page
Top cover on page 40)
Spare part number
507309-001
507312-001
509696-001
507310-001
512140-001
512143-001
37)