Power Connector; Bluetooth Module - HP G72-251 Maintenance And Service Manual

Power connector

Description
Power connector (includes cable)
Before removing the power connector cable:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the memory module (see
7. Remove the wireless module (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the top cover (see
11. Remove the display assembly (see
Remove the power connector cable by disconnecting the cable connector from the system board.
Reverse this procedure to install the power connector cable.

Bluetooth module

Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module:
Maintenance and Service Guide
"Battery" on page 4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page 4-18).
"Top cover" on page
"Display assembly" on page
4-8).
4-11).
4-13).
4-16).
4-23).
4-28).
Removal and replacement procedures
Spare part number
600719-001
Spare part number
537921-001
602538-001
4–41