Top Cover - HP G72-251 Maintenance And Service Manual

Top cover

Description
Includes TouchPad board for biscotti computer models
Includes TouchPad board for silver computer models (for model 1.1 only)
Before removing the top cover:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the memory module (see
7. Remove the wireless module (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the speakers (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove four Phillips PM2.5×3 screws from the battery bay 1, one Phillips PM2.5×6.5 screw 2 from the hard
drive bay (identified with a triangle icon embossed on the inside of the hard drive bay), and 11 Phillips
PM2.5×6.5 screws 3 from the base enclosure.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
Maintenance and Service Guide
"Battery" on page 4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page 4-18).
"Speakers" on page 4-21).
4-8).
4-11).
4-13).
4-16).
Removal and replacement procedures
Spare part number
600716-001
610696-001
4–23