Memory Module - HP G72-251 Maintenance And Service Manual

Memory module

Description
Memory module, 1 GB, 1066 MHz DDR3
Memory module, 2 GB, 1066 MHz DDR3
Memory, module, 1 GB (6400 MHz, DDR2) (for model 1.1 only)
Memory module, 2 GB (6400 MHz, DDR2) (for model 1.1 only)
Before removing the memory module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Loosen the three Phillips PM2.5×5.0 captive screws 1 that secure the memory module compartment cover to
the computer.
2. Lift the back side of the memory module compartment cover 2, and then remove the cover 3 at an angle to
avoid breaking the tabs on the cover. The memory module compartment cover is included in the Plastics Kit,
spare part number 595200-001.
Maintenance and Service Guide
"Battery" on page 4-7).
Removal and replacement procedures
Spare part number
598859-001
598856-001
619545-001
619546-001
4–11