HP G62-373 Maintenance And Service Manual page 74

Removal and replacement procedures
7. To remove the Display Bezel, flex the inside edges of the bezel at the top and bottom 1, and the left and right
sides 2, until the bezel disengages from the display enclosure.
8. Remove the display bezel 3.
Reverse this procedure to install the display bezel.
9. To replace the webcam module (select models only), lift the webcam module as far from the display enclosure
as the webcam module cable allows.
10. Disconnect the webcam module cable 1 from the webcam module, and remove the webcam module 2. The
webcam module is available using spare part number 600166-001.
Reverse this procedure to install the webcam module.
4–30 Maintenance and Service Guide