Speakers
Description
Speaker assembly (includes cable)
Before removing the speakers:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
6. Remove the memory module (see
7. Remove the wireless module (see
8. Remove the optical drive (see
9. Remove the keyboard (see
10. Remove the top cover (see
Remove the speakers:
1. Remove the three Phillips PM2.5×3.0 screws 1 that secure the speaker assembly to the top cover.
2. Lift up and remove the speakers 2.
Reverse this procedure to install the speakers.
Maintenance and Service Guide
"Battery" on page
4-7).
"Hard drive" on page
"Memory module" on page
"Wireless module" on page
"Optical drive" on page
"Keyboard" on page
4-17).
"Top cover" on page
4-8).
4-10).
4-12).
4-14).
4-20).
Removal and replacement procedures
Spare part number
602744-001
4–25