Removing A Digital Card; Using A Usb Device - HP Folio 13-1020 User Manual

Removing a digital card

CAUTION:
procedure to safely remove the digital card.
1. Save your information and close all programs associated with the digital card.
2. Click the remove hardware icon in the notification area, at the far right of the taskbar. Then
follow the on-screen instructions.
3. Remove the card from the slot.
NOTE: If the card does not eject, pull the card out of the slot.

Using a USB device

Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external
device, such as a USB keyboard, mouse, drive, printer, scanner, or hub.
Some USB devices may require additional support software, which is usually included with the
device. For more information about device-specific software, refer to the manufacturer's instructions.
These instructions may be provided with the software, on disc, or on the manufacturer's Web site.
Your computer has one USB 2.0 port and one USB 3.0 port.
NOTE: Your computer model is equipped with one USB 3.0 port, which connects an optional USB
3.0 devices and provides enhanced USB power performance. USB 3.0 ports are also compatible with
USB 1.0 and 2.0 devices.
An optional docking device or USB hub provides additional USB ports that can be used with the
computer.
To reduce the risk of loss of data or an unresponsive system, use the following
Using a USB device 43