HP Compaq Evo N1010v Series Service Manual page 92

Component
Guide, HDD
Heat sink (with fan)
Keyboard
Panel, wireless
PCA, I/R
PCA, left and right
antennas (wireless
models only)
PCA, motherboard
PCA, switchboard
Socket, PCMCIA
Speaker assembly
2-62 Removal and Replacement
Removal Procedure
Keyboard cover(page 2-13)
Speaker (page 2-15)
Keyboard (page 2-16)
Switchboard PCA(page 2-19)
CD/DVD (page 2-20
Display (page 2-23)
Top case (page 2-26
See page page 2-32
See page 2-3
Keyboard cover(page 2-13)
Speaker (page 2-15)
Keyboard (page 2-16)
Switchboard PCA(page 2-19)
CD/DVD (page 2-20
Display (page 2-23)
Top case (page 2-26)
See page 2-36
Keyboard cover(page 2-13)
Speaker (page 2-15)
Keyboard (page 2-16)
Switchboard PCA(page 2-19)
CD/DVD (page 2-20
Display (page 2-23)
Top case (page 2-26)
Floppy (page 2-32)
Heat sink (page 2-40)
Motherboard (page 2-50)
Bottom case (page 2-59)
See page 2-50
See page 2-3
Keyboard cover(page 2-13)
Keyboard (page 2-16)
CD/DVD (page 2-20)
Display (page 2-23)
Top case (page 2-26)
Floppy (page 2-32)
Heat sink (page 2-40)
Motherboard (page 2-50)
See page 2-3.
Additional Steps
When replacing the HDD guide, make
sure you only replace the 2 right screws.
Do not replace the 2 left screws.
Press the tabs on both sides of the panel,
and then lift it from the bottom case.
Disconnect the front antenna PCA cables
from the Mini PCI card (page 2-7).
Be careful not to bend the metal tabs on
the bottom case when removing or
replacing either of the 2 antenna PCAs.
1. Remove the 2 screws attaching the
socket to the motherboard.
2. Unplug the PCMCIA socket from the
motherboard.
Service Manual