Replacing Small Parts; Table 2-4. Replacing Small Parts - HP Compaq Evo N1010v Series Service Manual

Replacing Small Parts

The user can replace the following small parts.
Part
Rubber screw plugs,
display (on display bezel)
Door, Mini PCI
Door, memory
Feet, rubber
(on bottom of notebook)
Rubber cover,
docking port
(ze4500 only)
Cover, modem port
2-12 Removal and Replacement

Table 2-4. Replacing Small Parts

Replacement Procedure
Insert a small flat-blade screwdriver under the rubber screw plug and pry it
loose.
To replace, firmly press the adhesive side of the screw plug into the recess.
On the bottom of the notebook, loosen the screws that secure the Mini PCI
door to
the bottom case, and then remove the door.
On the bottom of the notebook, loosen the screws that secure the SDRAM
module door
to the bottom case, and then remove the door.
Insert a small flat-blade screwdriver under the foot and pry it loose. To
replace, firmly
press the adhesive side of the foot into the recess.
Grasp the rubber docking port cover with your fingers and gently remove it. To
replace,
firmly press the docking port cover into the opening in the bottom case.
Insert a small flat-blade screwdriver at the top of the cover and gently pry it
loose.
To replace, insert the cover into the modem port opening.
Service Manual