HP EliteBook 6930p Maintenance And Service Manual page 54

6. Release the bottom edge of the display bezel (3) from the display assembly.
7. Release the zero insertion force (ZIF) connector (1) to which the keyboard light cable is attached,
and disconnect the keyboard light cable from the display inverter.
8. Remove the two Phillips PM2.5×4.0 screws (2) that secure the display inverter to the display
enclosure.
9. Release the display inverter (3) from the display enclosure as far as the display panel cable and
backlight cable allow.
10. Disconnect the display panel cable (4) and the backlight cable (5) from the display inverter.
11. Remove the display inverter.
Reverse this procedure to install the display inverter.
46 Chapter 4 Removal and replacement procedures