Removal and Replacement Procedures
2. Turn the top cover right-side up with the TouchPad
toward you.
3. Disconnect the Bluetooth board cable 1 from the Bluetooth
board.
✎
4. Remove the 2 PM1.5×3.0 screws 2 that secure the Bluetooth
board to the top cover.
5. Slide the Bluetooth board forward 3, then lift it up 4 and
remove it from the top cover.
Removing the Bluetooth Board
Reverse the above procedure to install the Bluetooth board.
5–38
The Bluetooth board cable is included in the Miscellaneous
Cable Kit, spare part number 336973-001.
Maintenance and Service Guide