Power Button Board - HP Compaq Presario,Presario V6500 Maintenance And Service Manual

Power button board

Description
Power button board (includes power button board cable)
Before removing the power button board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the switch cover (see
5.
Remove the keyboard (see
6.
Remove the power button board:
Remove the Phillips PM2.5×4.0 screw (1) that secures the power button board to the fan/heat sink
1.
assembly.
Release the power button board (2) from the computer as far as the cables allow.
2.
Disconnect the microphone cable (1) and the speaker cable (2) from the power button board.
3.
Release the ZIF connector (3) to which the power button board cable is connected, and disconnect
4.
the cable.
Battery on page 42).
Switch cover on page
Keyboard on page 55).
53).
Component replacement procedures
Spare part number
431438-001
57