Inserting Or Removing A Battery - HP Compaq Presario,Presario V6000 User Manual

Inserting or removing a battery

CAUTION
initiate hibernation or turn off the computer before removing the battery.
NOTE
To insert a battery:
1. Turn the computer upside down on a flat surface, with the battery bay away from you.
2. Insert the battery into the battery bay (1) and rotate it downward until it is seated (2).
The battery release latch (3) automatically locks the battery into place.
To remove a battery:
1. Turn the computer upside down on a flat surface, with the battery bay away from you.
2. Slide the battery release latch (1) to release the battery.
3. Pivot the battery (2) away from the computer and remove it from the computer (3).
18 Chapter 7 Batteries
To prevent loss of information when removing a battery that is the sole power source,
Batteries vary in appearance by model.
ENWW