Initiating Or Restoring From Hibernation - HP Compaq Presario,Presario V6000 User Manual

Initiating or restoring from hibernation

Hibernation cannot be initiated unless it is enabled. Hibernation is enabled by default.
To be sure that hibernation remains enabled, select Start > Control Panel > Performance and
Maintenance > Power Options > Hibernate tab. If hibernation is enabled, the Enable hibernation
check box is selected.
Task
Initiate hibernation.
Allow the system to
initiate hibernation
(with hibernation
enabled).
Restore from user-
initiated or system-
initiated hibernation.
*If you have been registered to a network domain, the button you click is called Shut Down instead of Turn Off Computer.
†If the system has initiated hibernation because of a critical low-battery condition, connect external power or insert a charged
battery before you press the power button. (The system does not respond if the discharged battery is the only power source.)
ENWW
Procedure
● Press the power button.
– or –
● Select Start > Turn Off Computer.*
Then, hold down the shift
select Hibernate.
In Windows XP Professional, if
hibernate is not displayed:
a. Click the down arrow.
b. Select Hibernate from the list.
c. Click OK.
No action is required. A computer running
on battery power initiates hibernation,
according to the following conditions:
●
After 30 minutes of computer
inactivity.
●
When the battery reaches a critical
low-battery condition.
NOTE Power settings and
timeouts can be changed using
Power Options in Windows Control
Panel.
Press the power button.†
Result
● The power lights turn off.
●
The screen clears.
key as you
● The power lights turn off.
●
The screen clears.
●
The power lights turn on.
● Your work returns to the screen.
Initiating or restoring from hibernation 11