Connecting A Usb Device; Stopping A Usb Device - HP Compaq Presario,Presario V6000 User Manual

Connecting a USB device

CAUTION
To connect a USB device to the computer, connect the USB cable for the device to the USB port. The
operating system will issue a sound to indicate that a device has been detected.
NOTE
displayed in the notification area, at the far right of the taskbar.

Stopping a USB device

CAUTION
before removing it.
CAUTION
USB device.
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE
(< or <<) in the notification area.
2. Click the name of the device in the list.
NOTE
it.
3. Click Stop.
2 Chapter 1 Using a USB device
To prevent damage to a USB connector, use minimal force to connect a USB device.
The first time you connect a USB device, the "Found New Hardware" message is
To prevent loss of information or an unresponsive system, stop the USB device
To prevent damage to a USB connector, do not pull on the cable to disconnect the
To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
If the USB device is not listed, you do not have to stop the device before you remove
ENWW