HP Compaq Presario,Presario V3501 Maintenance And Service Manual page 74

If it is necessary to replace any of the display assembly internal components, remove the following
9.
screw covers and screws. The display rubber screw covers are included in the Rubber Feet Kit, spare
part number 417096-001.
(1) Six rubber screw covers on the display bezel top edge and bottom edge corners
(2) Two rubber screw covers on the display bezel bottom edge
(3) Eight Phillips PM2.5×7.0 screws
NOTE:
must be installed in the bottom center screw holes.
Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
10.
bezel until the bezel disengages from the display enclosure.
Remove the display bezel (3). The display bezel is available using spare part number 448613-001
11.
including microphone for computers with Intel or AMD processors, or 455820-001 not including
microphone for computers with AMD processors.
If it is necessary to replace the display inverter, remove the two black Phillips PM2.5×5.0 screws
12.
(1) that secure the inverter to the display enclosure.
66 Chapter 4 Removal and replacement procedures
There are two different sizes of display bezel rubber screw covers. The thicker covers (2)