Connecting A Monitor, Projector Or Television - HP Compaq Presario,Presario R4000 Hardware And Software Manual

Multimedia
Connecting a Monitor, Projector or
Television
Connecting a Monitor or Projector
To connect an optional VGA monitor or projector to the
notebook:
1. Be sure the monitor or projector is turned off.
2. Connect the VGA cable on the monitor or projector to the
external monitor port, which is on the rear of the notebook.
3. Plug the power cord of the monitor or projector into a
grounded AC outlet.
4. Turn on the monitor or projector.
❏
❏
4–6
If the notebook does not recognize the monitor or
projector, restart the notebook.
If a properly connected monitor, projector or other display
device does not display an image, try pressing the
hotkey until the image is switched to the new device.
Hardware and Software Guide
fn+f4