Changing Drivelock Passwords - HP Compaq Presario,Presario R4000 Hardware And Software Manual

Security

Changing DriveLock Passwords

To change a DriveLock password:
1. If the notebook is on, shut down the notebook.
If the notebook is not on and you are not sure whether the
notebook is off or in hibernation, press the power button.
When the notebook has turned on or restored from
hibernation, shut down the notebook through the operating
system.
2. Turn on the notebook.
3. Press
lower-left corner of the screen.
4. Use the arrow keys to select Security > DriveLock
Password, and then press
5. Type the current password in the Enter Current Password
field, and then press
6. Type the new password in the Enter New Password field,
and then press
7. Type the new password in the Confirm New Password field,
and then press
8. When the Setup Notice is displayed, press
changes.
9. To save your preferences and exit the Setup utility, press
and then follow the instructions on the screen.
Your preferences are in effect when the notebook restarts.
12–16
while the Setup message is displayed in the
f10
enter.
enter.
enter.
enter.
Hardware and Software Guide
to save your
enter
f10
,