Preinstalled Communication Software - HP Compaq Presario,Presario R4000 Hardware And Software Manual

7. In the Phone and Modem Options dialog box, select the
8. Select your modem, and then select Properties.
9. Clear the check box for Wait for dial tone before
10. Select OK > OK.

Preinstalled Communication Software

To access preinstalled modem software for terminal emulation
and data transfer:
1. Select Start > All Programs > Accessories >
Communications.
2. Select a fax or terminal emulation program or a connection
wizard.
For information about establishing an Internet connection for
your modem, refer to the "Connect to the Internet" section in the
printed Getting Started guide included with your notebook.
For more modem information, including instructions for using AT
commands and dial modifiers, refer to the supplementary guides
included with your notebook. These guides, which are provided
only in English, include Modem Command Guidelines (Advanced
Users Only) and a guide to the AT commands supported by your
modem.
Hardware and Software Guide
Modems tab.
dialing.
Modem and Networking
10–9