HP Compaq Presario,Presario CQ62-220 Maintenance And Service Manual page 85

e. Speaker assembly (see
f. Display assembly (see
Remove the following cables from the system board:
● Power connector cable (see
●
USB board cable (see
1. Turn the computer upright with the right side toward you.
2. Remove the three Phillips PM2.5×4.0 (1) screws that secure the system board to the computer.
3. Grasp the right edge (2) of the system board.
4. Lift the system board (3), and pull it away from the base enclosure at an angle.
Reverse this procedure to install the system board.
Speaker assembly on page
Display assembly on page
Power connector on page
USB board on page 67)
61)
70)
69)
Component replacement procedures 77