Display Assembly - HP Compaq Presario,Presario CQ62-220 Maintenance And Service Manual

Display assembly

Description
39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly for use in:
● HP G62 computer biscotti computer models
● HP G62 computer biscotti computer models with webcam
●
HP G62 silver computer models
●
HP G62 silver computer models with webcam
●
HP G62 white computer models
● HP G62 white computer models with webcam
● HP G62 matte black computer models
●
HP G62 matte black computer models with webcam
●
Presario CQ62 biscotti computer models
●
Presario CQ62 biscotti computer models with webcam
●
Presario CQ62 matte black computer models
● Presario CQ62 matte black computer models with webcam
Before removing the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
on page
6. Remove the following components:
a. Optical drive (see
b. Keyboard (see
c. Top cover (see
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Disconnect the display panel cable (1) and the microphone cable (2) from the system board and
remove it from its routing channel.
70 Chapter 4 Removal and replacement procedures
Battery on page
50).
Optical drive on page
Keyboard on page
Top cover on page
44).
48)
55)
58)
Spare part number
595185-001
595186-001
605141-001
605142-001
605143-001
605144-001
608109-001
608110-001
602170-001
602171-001
595187-001
595188-001
WLAN module