Power Connector Cable - HP Compaq Presario,Presario CQ42-121 Maintenance And Service Manual

Power connector cable

Description
Power connector cable (includes cable and connector)
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Top cover (see
Remove the power connector cable:
1. Turn the computer upright with the right side toward you.
2. Disconnect the power connector cable (1) from the system board.
3. Lift the power connector (2) from the clips built into the base enclosure.
4. Remove the cable from the base enclosure.
Reverse this procedure to install the power connector cable.
ENWW
Battery on page 52).
Hard drive on page 53)
Optical drive on page
Keyboard on page 62)
Top cover on page 64))
56)
Component replacement procedures
Spare part number
600630-001
73